Reply to thread

Message: <blockquote data-quote="toohp" data-source="post: 94896" data-attributes="member: 3134"><p>Thanks heaps guys , just 1 more question if ok ? I just tilted the cab & disconnected the wire to each coil to try & find out which coil & stem the aux hyd work off , there s 2 coils on top of valve bank & 1 going into the side of Bics . But I disconnected 1 coil at a time then ''ALL 3'' & the aux hyd still works ,( how does this work ) so.... is it the 2 ontop of valve bank that work the aux hyd or all 3 Inc the horizontal bics one ?? The only thing that wouldn't work was lift & tilt once the bics was disconnected . The issues getting worst as I got the aux hyd the stop only after several minutes of opening & closing with all wires ''connected '' unlike previously after several hours after getting hot , a good thing if I need a electrician to check . And yes unfortunatly 1 of those stems here in Oz is $650 ! Part no 6665758 stem Part no 6666616 stem $193 6667687 $ 231 Parts here are getting Crazy !!!! Several years ago I replaced the fan motor , I got it from the states for $200 on special Here in Oz they wanted $1,300 !!!!!!! Cheers Toohp</p></blockquote><p></p>