Reply to thread

Message: <blockquote data-quote="Mlewis" data-source="post: 117054" data-attributes="member: 20855"><p>Question I have a 753c serial number 512724659 Bobcat that has the BICS controller that will just loose power and lock the brakes and all hydraulics I have replaced the computer which is on the left side under seat behind foot which I know has nothing to do with this. And wiring harness from the bics controller all the way to the bar replace all the fuses I have also replaced all the relays I also put a inline fuse for the BICS controller at the fuse box on today for the main power. Also the brake solenoid is new I also have checked the BICS wiring and I believe the orange wire going into it is the power but have not been able to find the wiring diagram for this but it seems like that is it but when the power shuts off the orange wire still has power on it. I've checked the power at the alternator and while it's running I'm getting a steady 14.6 and the alternator is new. not sure we're to go from here and my gut is getting sore from it locking down any thoughts or were to go from here? Also notice today that when the power goes out ont the controller I still have power on the orange wire ???</p></blockquote><p></p>