Reply to thread

Message: <blockquote data-quote="jp8775" data-source="post: 117135" data-attributes="member: 20329"><p>But it is leaking fluid "out" around the valve body, I replaced the spool vale seals at the valves in front seals they are quad seals so hard to screw up and no fluid is leaking from the front. Seems to be coming from the under side of the valve body it runs down the side closest to the frame away from the hydrostatic.  Its defiantly around the valve body so hard to look at it. Thats why I was wondering if I could just "T" into the bucket tilt lines with a electric pump and pressurize the line or will this hurt any thing? I have a electric hydro pump, 3200 psi 3.7 GPM with a 2 gallon tank. Could go in line with Bob tack tilt lines. It has a momentary switch so I can just bump it. Valves at the rear do not leak easy to see them from the engine compartment!</p></blockquote><p></p>