Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 40464" data-attributes="member: 82">Bobcat do not sell over sized bushings, you will need to machine one up your self.Is it the actual eye of the ram that is worn? os has the bosses on the bobtach worn too? Both can be fixed, but when you weld the bosses back in on the bobtach, you need to ensure they are straight or you will damage your cylinder due to it twisting from side to side.I have done a few of these. When the eye on the ram gets too bad, i cut it off and make a new eye and weld it on. It can all be done, you just need to have the gear or know someone that does.</blockquote>