Reply to thread

Message: <blockquote data-quote="K20SwappedCat" data-source="post: 105313" data-attributes="member: 16979"><p>So Recently i got my grandfathers old bobcat 732 going. I put a new ignition kit in, new points, new distributor cap, cleaned carb ,everything was set started and ran fine didn't like low throttle but happily ran at full throttle. I Was clearing some woods when the machine shut off, wouldn't fire off. So i got some gas put it in, it wouldn't start unless i was fully pulling the choke out and holding it even then it ran weird. Then next day comes i pulled the carb cleaned it, pulled the fuel filter cleaned it and it still doesn't start. It wants to and pops off as soon as i turn the key, Then dies immediately then i have to wait to crank for like 6 seconds before it even thinks about firing. fuel is coming out of the fuel pump, I fixed a ground that was off, I also fixed the leaking pressure sensor on the portblock. Any ideas on this? Im baffled of whats going on, It's probably something simple im not seeing.</p></blockquote><p></p>