Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 43060" data-attributes="member: 82">I have never worked on a 642, but i suspect its the same basic principal as a 743.Remove the bottom 2 bolts holding the pump to the chain case, remove the lift linkage under the pump. Support the pump with a bar and wire. Remove the 20 odd bolts holding the frame to the chain case Remove the drive motor hoses and jack the frame up and roll the chaincase out from under neath.Make sure you use lifting gear that is rated to handle the load. The machine weighs 2 tonne, you don't want that falling on you!</blockquote>