Bobcat 632

[justchew1]

Hi all, I recently acquired a 632, wondering how to look up after market parts such as water hoses, water pump, air filter, leads ect.. Also im sure if there is oil in the hydraulic pump after sitting so long, the hyd filter was full. how do I check, bleed start without damaging please. Machine has been in a paddock for a few years, water in chain case which I have drainer and am cleaning before refilling, I believe this is an oil bath and does not run through any oil systems,so I plan to run,drain and refill to remove remaining scum, is this correct? Is there anything else major I should check before starting to give her the best chance? Thankyou for any info

 

[flyerdan]

There isn't a book for the 632 floating around, but it looks like the 463 and 553 should be close as to how they are built and put together. They will do for reference as to what you might expect when you start tearing into things.
As for aftermarket parts, probably the best way would be to find an online catalog like Loader Parts Source has and get OEM numbers to search crosses for. Ebay has a lot of parts you can find with the oem numbers as well, often at quite good prices.