Reply to thread

Message: <blockquote data-quote="cdmccul" data-source="post: 123248" data-attributes="member: 9318">So I have an older 632, and I'm in the process of updating it.I bought it with a dead hour meter showing 3148, but I knew the previous owner before he died. I bought it from the estate. I know it got a new motor (1.6 Ford Kent), and it new Firestone ave a new Bobcat seat at that time. I rebuilt the carb on it, several times, before finding a gent on YouTube that showed how the carbs warp. Milled the carb flat, runs nice now. New electric fuel pump, away go! Now I'm wanting to install heat and a door. The cab already had a pair of plexi side windows and a back window, and I added a top window of the same material. So now a door... I bought a set of door hardware from skidsteerdoors.com so I have hinges, a handle, and strike bolt. I will make a door out of plexi to hold the hardware and add a door seal around it. But - I need the filler for the bottom of the door. I found a salvage yard that claimed to have it, but they sent me the wrong part. Refund on the way, thankfully.I need part number 6555060. Anybody got one? They should be the same on round/rectangular light 520, 530, 630, 631, 632, and 732 machines. Or does anybody have any good pictures of them they would share? I have access to hand tools and a welder... Possibly a sheet metal brake. I'd like to know how high above the cylinder guard I have to be to miss the door.Pictures to come later!</blockquote>