Reply to thread

Message: <blockquote data-quote="Stevebusmc" data-source="post: 108179" data-attributes="member: 17783"><p>Thank you for the response. I will give that a try. I did have good compression on 3 of the 4 cylinders but #1 was down substantially which prompted me to tear it down. The bottom end is good but my concern is that after getting the Pistons out if it will be worth the machine work necessary? An air cooled horizontal shaft looks tempting. I will get the lip cut out so I can get the Pistons out and see what the problem is and post an update soon. Thanks again.</p></blockquote><p></p>