Reply to thread

Message: <blockquote data-quote="jlmoon" data-source="post: 66137" data-attributes="member: 8888"><p>Hello Steve, The small (3rd) line from the drive motors will be your case drain, this is the return line back to your low pressure side of your hydraulic system (someone correct me if I'm wrong) but should be around 125 to 250psi. I believe there are a couple of case drain filter assemblies inline with this either #4 or #6 hose. This oil returns to your reservoir via a port block with low pressure relief valve and eventually ends up getting filtered and put back into your main hyd oil tank. I hope I got that circuit right! JLM</p></blockquote><p></p>