Reply to thread

Message: <blockquote data-quote="bingo" data-source="post: 26013" data-attributes="member: 2728"><p>mine was doing to same thing, that yous is and it went south or quit running, it first blowed both head gaskets and i replaced them and torqued them down and tryed to start it but it would not start so i took a compression test and 1 and 2 cyl has only about 40-45 lbs and 3 has 70 lbs. and 4 has 60 lbs not enough to start it it was running real bad before that too.thinking about replacing it with another but dont know what engines will work in it this is the first skid loader i have ever owned and it has the wisconsin vh4d1 in it also. im like you dont want to sink a lot of money in this engine when theres better engines out there that are a lot cheaper and parts for them are cheaper to replace..so if you know of any engines that will work let us know... open for all options...I would think the u-joint issue could be fixed to connect to about any engine but im just guessing....</p></blockquote><p></p>