Reply to thread

Message: <blockquote data-quote="liflod" data-source="post: 89529" data-attributes="member: 12830"><p>I don't think I mixed them up. I ran it last night and it is doing the exact same thing as before I did the pump. Low charge pressure and very little drive to the wheels. I think I am going to cap the charge pressure hose going to the hydrostatic pump. If the charge pressure increases to by-pass pressure, the pumps still leak excessively. If the pressure does not increase, the problem is probably the bypass valve or something other than the pump. I need to go buy caps and plugs for the line since I do not have any hydraulic fittings laying around the shop. I may pick up the fittings to bypass the motors also since that may help my troubleshooting. Do you know what size caps and plugs I would need to purchase? I'll measure them tonight, but maybe someone knows the sizes. Thanks, Lance</p></blockquote><p></p>