Bobcat 553 Bics solienoid is hot

[GeorgeP]

I have a 553 bobcat and I replaced the brake solienoid work fine then it got so hot and quite working. What the voltage suppose to be coming out of the wires to the solenoid. I was thinking that either the relay is bad or the plugs are getting water in then. Any help would be appreciated. Thanks

 

[Tazza]

It could indeed be a sticky relay. If so, it may have burnt up the new coil.
I believe it runs on 12v.
It should have ground, 12v to pull it up for a few seconds max. Then one should have 12v for hold, this holds the brake up.
If the pull coil has 12v at all times, something is sticking on, possibly the relay or even the controller is bad.