Bobcat 463 cab

[463-Guy]

I bought a 2006 463F and am wondering if anyone knows of where to get a deal on the cab enclosure and heater. I was able to find a Bobcat SB-150 48" snowblower and thinking a cab enclosure is going to be a must for it! Thanks in advance for your help

 

[Tazza]

Ebay would be the cheapest option i'd think. Not a lot of space in a 463, so i really don't know how you will go with mounting a heater in there, i'm sure ut has been done, but will be close.

 

[463-Guy]

Ebay would be the cheapest option i'd think. Not a lot of space in a 463, so i really don't know how you will go with mounting a heater in there, i'm sure ut has been done, but will be close.

I know at you can get a heater from bobcat and could have ordered when it was new

 

[SkidRoe]

I know at you can get a heater from bobcat and could have ordered when it was new

Since you are asking, I am assuming that you don't want to buy the kit from Bobcat...
If you look under the Home Made section, you can find a picture of the door I made for mine out of a sheet of 3/8“ Lexan.
I bought the back and top window from Bobcat, as they were pretty reasonably priced.
Side windows, I cut out of 1/8” acrylic, then screwed into place.
As for the heater, unless you live in an extremely cold region (I am in Canada), it is not something I would be quick to install. I find that the heat coming off of the hydraulics under the seat keeps the cab pretty toasty. Keeping condensation off of the door window can be a problem, but you can get sprays that help with that.
Now, if you want to blow snow in shorts and a t-shirt....
Hope this helps - SR