Reply to thread

Message: <blockquote data-quote="kyhamoge" data-source="post: 89918" data-attributes="member: 8687"><p>SR - From what I can tell, just the tension pulley needs replacement...nothing left of the central spacer. The pulley is actually sitting cock-eyed because of the excessive wear. It just doesn't look like there is enough clearance between the mounting bolt on the arm and the frame to remove the pulley! It looks like there's barely enough room to remove the nut! For sure it's going to require a very long box wrench (ratcheting) to attempt. Anyway, I'm not sure if the 440 has the exact same setup or not. Can you indicate how much clearance you have between the mounting bolt/stud on the pulley arm and the machine's frame? As always, your help is MUCH appreciated!</p></blockquote><p></p>