Reply to thread

Message: <blockquote data-quote="gost" data-source="post: 9293" data-attributes="member: 1140"><p>Hi, as I was not the one that replaced the pump, (it was a mechanic hired by the former owner) I know nothing about the "red push plug" I hope the mechanics did otherwise they have to do the same work again. But as the machine have the same problem before/after the pump is replaced i guess the plug is not there. I think it cannot be the drive belt as it´s pretty tight. Yes I know about that I should have replaced the filter, but it looks new - even on the inside, and I think someone have tried to fix the problem earlier by replacing the filter. It lookes brand new. I really dont know about the foaming I havn't looked into the hyd tank yet, but when I looked on the oil on the oil slick it looked very good and not full of bubbles. When I tilt/lift the hydraulis it sort of groans, can this be the "relif valve" - or can if be a valve that does not closes/opens fully? I think the best for me is to take it to a Bobcat dealer for a flow meter test.</p></blockquote><p></p>