Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 9292" data-attributes="member: 782"><p>There is usually a red push in plastic plug in the pump in a port right next to the input shaft that has to come out before you install the pump as once it is mounted you can't get to it , did you take that plug out ---------is your drive belt going to the pump tight and not slipping --------are you still foaming (bubbling ) up the oil ---------when ever you change a pump you should change the filter before you crank it up as trash may have been in the system and you may have trashed the new pump</p></blockquote><p></p>