Bobcat 440b auxilary hydraulic linkage

[Firefarm]

I'm attempting to put auxilary hydraulics on my 440b. The valve is already installed and I bought the cable and required mounts and linkages from the local Bobcat dealer. I'm just having a little trouble figuring out how the cable gets routed to the valve and how the linkages work. Does anyone have any pictures or a better schematic that is better than the one from the parts manual? Thanks in advance, Jason

 

[OldMachinist]

See if this post helps. http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=45036
You could also ask the dealer you got the parts from for a copy of the instruction sheet. It should be part number 6566718.

 

[Firefarm]

See if this post helps. http://www.skidsteerforum.com/DesktopDefault.aspx?tabid=54&frmView=ShowPost&PostID=45036
You could also ask the dealer you got the parts from for a copy of the instruction sheet. It should be part number 6566718.

Thanks for the link. I had studied that post prior to ordering my parts but the linkages are a little different than what is offered for a 440. I'll call the dealer and see if they have an instruction sheet.