Reply to thread

Message: <blockquote data-quote="Hotrod1830" data-source="post: 82661" data-attributes="member: 4331"><p>Its been several years since I did mine, I cant remember the number.  I got them from loader parts iirc.   If your doing seals, do all 4.  If the bearings are tight, you probably wont need any, but check them.  The bearings have a tendency to rust and pit.  No play at first, but they get loose fast.  Replace them if pitted.   Also make sure the chain case isnt cracked where the axle tubes are welded on.  Mine where cracked.  People sure are hard on these little things.</p></blockquote><p></p>