Bobbcat 743B

[L-H.L]

Hello. Does anyone have/can take photos of transfer from control levers to both auxilary ports on melroe control valve? should use a Snow plow with 2 wings and therefore need both auxillary hydraulics to do so. It does not look like the auxillary ports have ever been used since there are no wire or steel rods from control levers to the control valve. I have searched for interesting pictures and info, find very little. if someone can take pictures or have a drawing of the mechanism, it would be of great help. (do not need to spend time re-inventing the wheel.) Can post my email if somone will send me some pictures.? Thank you. Regards Leif-Håkon Limevåg. Norway.

 

[laurencen]

the left lever uses a cable to move the spool, the right is mechanical linkage, if i lift the cab again i will take a picture

 

[Tazza]

the left lever uses a cable to move the spool, the right is mechanical linkage, if i lift the cab again i will take a picture

As stated, it uses a push/pull cable for the second aux control.
Another way is to mount a dirverter on the plow with a switch in the cab to change the path of the fluid. Sa you want to angle it, flip the switch, move it, flip it off then back to “normal” operation.