Reply to thread

Message: <blockquote data-quote="500K_773" data-source="post: 93" data-attributes="member: 33">Bobbie-gI measured the bob-tach for my bucket and it is 44 9/16" ID also.  Some of the older Bobcats and smaller models use a smaller bob-tach plate.  I know because I cannot use my father-in-laws Rooter for his 610.  There are universal attachments that are wider, but they have the locator holes for the bottom pins at different spacings.  I found a universal mounting plate diagram from Bradco that is 49.5" wide, note the four holes at the bottom for different machines.  See the diagram at <a href="http://www.attachment.com/pdf/specsheets/Adapter%20Plates.pdf" target="_blank">http://www.attachment.com/pdf/specsheets/Adapter Plates.pdf</a>I don't know how wide the mounting hardware is for other skidsteers, ie.: John Deere, Case, Cat, etc...  If you find out please let me know because I am looking at building some of my own mounting plates also.  Hope this helps.</blockquote>