Reply to thread

Message: <blockquote data-quote="OldNeons" data-source="post: 115136" data-attributes="member: 8642"><p>At the recommendation of Bobcat service manager - I'm looking to replace the right hand joystick handle on my 763 C series. It has only the momentary left/right switch that controls the aux hydraulics, and the trigger for the horn/beeper. 5 wires total. Bobcat wants $450 for this handle - part number 6680413. Has anyone ever used a similar handle with more switches/wires - say a 6706568 and simply not used the extra switches and wires? The handles, wire connectors, etc appear the same? Or does anyone have any tips of possibly getting my switch to work? It appears to be potted in resin? Hate to spend $450 for a simple 3 position momentary switch.... I removed the handle assembly to change the main steering arm after it rusted off just below the handle. I was careful with the handle and wires/connector and have triple checked the connections. The switch functions -but will not disengage. When nudged left - it stays stuck left until you manually nudge the switch back right to release it. Same going to the right. Appreciate any help. Thanks</p></blockquote><p></p>