Aux hydraulics not woking... HELP

[ckimble94]

I have a 2012 case sr200 with only 366 hours on it and its never had anything hooked to the aux hydraulics until yesterday. when I hooked up the attachment and used the roller switch on the right joystick nothing would happen, fluid dripped out of the couplers after unhooking so I know the fluid is there but don't know what's wrong. really trying to figure out the problem and would greatly appreciate any advise! where and what do I need to check? thanks!

 

[Tazza]

Is there a button on the dash to enable the aux hydraulics? on later model Bobcat machines, the aux hydraulics is not turned on till you hit a button on the dash, could yours be the same?

 

[ckimble94]

Is there a button on the dash to enable the aux hydraulics? on later model Bobcat machines, the aux hydraulics is not turned on till you hit a button on the dash, could yours be the same?

Thanks for the reply, but I can't find any other button that has anything to do with the hydraulics. That's what I thought at first and I have looked all over it for a switch or button