Reply to thread

Message: <blockquote data-quote="krabill" data-source="post: 135367" data-attributes="member: 23026"><p>So not the best news.  The install went fairly smooth except my old handle had so much rust inside of it that the wires would not pull through.  Luckily I had another spare handle I picked up on ebay for 40 bucks or so.  Had no problems replacing the handle and fishing the wires though it and installing the plugs onto the new switch.  Got it all hooked up fired up the bobcat and hit the aux button, green light comes on, sadly no function still.  I guess its time to dig into the relays and wiring next.  I've read a few threads on here about relays being the issue. my erial number is a strange one, I dont have boss even though the wiring diagram (the picture without my writing on it) has my serial number and claims it is BOSS.  Those wire colors are right for my machine.  I had printed that old non boss page so I just wrote on there what my wires were and scratched out the old info then matched up the wire colors from the left handle to match those on the the new right handle.</p></blockquote><p></p>