Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 11049" data-attributes="member: 82">The floor is quite easy actually. There are 2 designs over here, a flat floor or a lifted floor. The flat floor is simply a sheet of 12-16mm biz sheet with a full length gusset welded to the sides. The other is a cutting edge front and back with a flat floor and like an A in the middle for strength. I repaired one with using 1/4" thick 3" angle iron for the rise on the A and welded the sheet to the inside.It would cost more to build than to buy i think. Look for a second hand one, don't go to the trouble of building one.</blockquote>