Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 31415" data-attributes="member: 307">Its simple, they have a drain cock by the injection pump, you caneven put a hose on itifyou like.Block heater goes in the frost plug on the operators left (in the end) of the cylinder head (not the block) . Remove the air filter housing to improve access. The hardest part is pouring the cooland back into the rad unless your lucky enough to have a machine with the lift out rad cover asopposed to the older hinge style.30 mins you should be in business.Ken</blockquote>