Axel
Well-known member
- Joined
- Dec 24, 2014
- Messages
- 75
Anyone out there experienced in diagnosing AHC(hand control) machines? the left handle has two LED lights. the left LED stays on while the right one blinks 2 times after each pause. I tried a different tilt hand controller the other day but no change. Waiting for a replacement one since that one looked like it had been previously used/installed. Problem started when I replaced the tilt actuator and resealed the tilt and lift spools. lift and tilt does not work, and the valve lock light on the BICS panel does not turn on at all. All other lights on the BOCS panel are on. Where should I look?
