Atilathehun99
Well-known member
- Joined
- Dec 17, 2011
- Messages
- 111
I have a set of pallet forks that attaches to the skid steer using brackets that accept the hoist and bucket pins. My plan is to turn it into a Bob-tach mount by welding an adapter plate to the forks. What thickness of adapter plate should I use? I'm thinking 5/16 or 3/8. I'd like to go 5/16 as it's a wee bit lighter. This isn't intended to see heavy loads.
Thanks in advance for suggestions and constructive comments.
Thanks in advance for suggestions and constructive comments.