Reply to thread

Message: <blockquote data-quote="ssstimes3" data-source="post: 14901" data-attributes="member: 1633"><p>ran into this on my 863G a month ago...the acs went bad as it got moisture in it....bad design by Bobcat as the panel it sits behind is about as low as it can be on the machine...cost of my acs computer was $895.00 for parts + labor...start with the wiring under the cab....check to see what the voltage is at the acs...if its not close to 14 then you might have a short or a bad ground...good luck</p></blockquote><p></p>