Reply to thread

Message: <blockquote data-quote="ZANMAN" data-source="post: 45109" data-attributes="member: 5949"><p>OK, The harness is not that big, check by the acs controller, where the harness comes close to the steering arms, rubs through right there, also check by your pedals, you can remove the 2 covers and inspect the harness there, also check where the wires exit the handles. One more place to check is right by the actuaters, the harness sometimes rubs through on the control valve. I have replaced many of these harnesses. you can get a wiring diagram from bobcat, I can't remember the color you need to follow, I think purple, remeber sensor voltage is only 8 volts, never use a power probe on a bobcat, you can damage the computers.</p></blockquote><p></p>