Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 1988" data-attributes="member: 82">Don't be too worried about the bobtach pins, i have an idea in my head of what i am going to do, i do have a lathe so i can make new pins and bushes easily. I will then get them hardened.It appears that it has been welded on the front where the arms go down as there is a big plate across the front which i don't think is stock. Unfortunatly i don't have a plasma cutter which i think you are refering to as an air arc welder, so i will gouge it out with a grinder and lay a hefty weld where the lift arms have cracked. But hopefully i can get an old set of lift arms off a friend but they are cracked too but i think it will require minimal effort to repair. The lift arms are one of the last things i am going to be worring about.Don't work too hard!</blockquote>