Reply to thread

Message: <blockquote data-quote="hyp7" data-source="post: 44602" data-attributes="member: 3703"><p>Well after a few months I was able fix this machine. I took everyones input and checked the machine over, I checked the bics which was unplugged and I got it plugged in and all lights lit up. But stll wouldnt move. So checked the solenoids, aux worked but couldnt hear the main control valve one. So replaced it. And still nothing. So started cracking lines to see if I could get oil out----nothing. Oil in tank was full. So i figued I would change the oil it seemd foamy and watered down. Started to drain the tank with the little line coming from tank to control valve and very little oil drained. Strange! so used a wire to clear the fitting and oil drained good. So now for the main rubber hose coming from tank to pump. Nothing would drain. Here is the kicker There was a rag in the tank blocking the rubber hose to the pump. I was shocked!!!!! Still shocked.( Previous owner must have upset someone.)But I was able to fill up the machine with hydro oil and she runs great!!!!! Prolly didnt need the main solenoid but it got one anyways. Thanks for everyones help on this. You guys are great!!!!!! Ps. Make sure nothing is in the tank that shouldnt be there.</p></blockquote><p></p>