Reply to thread

Message: <blockquote data-quote="Bobcatdan" data-source="post: 55063" data-attributes="member: 7339"><p>As long as case did not reinvent the control vavle, it would be on the opposit side of the vavle as the linkage connects. More then likly, the spool would have to be pulled out to service the detend, its just the way vavles are normally made. So figure in resealing the vavle. If you have never dealed with one of these, they are not rocket science, but are enough of a pain in the butt, that you will most likly come out ahead having somebody do it.</p></blockquote><p></p>