Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 18038" data-attributes="member: 782"><p>Dealer said you need long arms , came up with another plan , the 963 has two tanks , one under pump and motor and one up front under the foot controlls , there is a cross ove tube on the bottom of the two tanks , I am going to look at it and see if I can drill a hole in the front tank and install the pick up tube into it instead of the rear tank , no hurry for me as they are still able to use the machine as it runs out of fuel about 10 gallons from full as the tube must have broke off about 1/3 down from the top , as for cutting the metal I figured I would start a fire or melt something so the plan was a grinder with a thin blade with would be a job</p></blockquote><p></p>