Reply to thread

Message: <blockquote data-quote="antiquejohndeere" data-source="post: 45537" data-attributes="member: 5765"><p>I have a Bobcat 873F. Yesterday oil started leaking out of the tilt spool of the control valve on the spring end. I unhooked the linkage and took the 2 allen head screws out of the cap and pulled the spool piece out. The seal is orange in color and was damaged and I'm going to replace it. My question is how do you replace the seal on the other end. It looks to be recessed into the control valve block about 1" back and I don't see how you pull it out because there is a groove it appears to be recessed in so it doesn't appear you can just pull it out. Thanks for any help</p></blockquote><p></p>