863 Bobcat

[onarollpaint]

I keep having problems with my traction lock override. First it blew a fuse. Then later i figured out the connection where it plugs into the BICS was lose. Now it has broken again. The BICS flashes 4 times which means traction lock pull circuit is open? I pulled the solenolid and removed the steel rod so i could move the machine. The hydraulics are frozen now. A friend of mine said you can by pass the Traction lock all together? Any ideas out there.

 

[Tazza]

Could be a bad relay for the traction lock or even a burnt out coil.
You can by-pass the brake, but it's better if it's fixed.