Reply to thread

Message: <blockquote data-quote="imfixinmopars" data-source="post: 13433" data-attributes="member: 1543"><p>i have a '02? 863 bobcat,and the serial number is a 514451298.only one of the aux lines deliver oil psi to the connections on front of the arm,for post hole digger ect. i have cked the voltage at the unworking circuit,to the solinoid and its 9.68 volts under load,i also switched the coil from another 863 that i know works,and no go. then i switched the valve itself,w/ a unit that worked fine,and its clicking,while engaging the switch on the rh handle,but no oil psi to the line.i had the lines diconnected too. the other flows great. im lost at this point. any ideas? im new to the site,but im sure im gonna be here a lot,thanks for any help in advance! mike at imfixinmopars@hotmail.com</p></blockquote><p></p>