863 air filter indicator?? and replacement housing

Help Support SkidSteer Forum:

mogman

Active member
Joined
Apr 29, 2012
Messages
40
Does anyone know what the recommended max restriction is on the 863 air filter, I see indicators available in many different ranges. BTW if you need a replacement housing (mine got melted by a bad muffler) the factory replacement is not the same, some modifications are going to be necessary and the dealer did not have a clue. Thanks
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,840
Sadly i don't know, i got a used one from an earth moving wrecker years ago, i'd be interested in knowing what the correct one is too.
 
OP
OP
M

mogman

Active member
Joined
Apr 29, 2012
Messages
40
Sadly i don't know, i got a used one from an earth moving wrecker years ago, i'd be interested in knowing what the correct one is too.
I found in an installation manual for the 2011 turbo, which I think is the same engine only air cooled. MAX new filter 25mbar max dirty filter 50mbar (paper)
 
OP
OP
M

mogman

Active member
Joined
Apr 29, 2012
Messages
40
I found in an installation manual for the 2011 turbo, which I think is the same engine only air cooled. MAX new filter 25mbar max dirty filter 50mbar (paper)
Which converts to about 20" water max
 

Latest posts

Top