Reply to thread

Message: <blockquote data-quote="roxrobin" data-source="post: 8424" data-attributes="member: 1079"><p>This model has the port relief (new) and a separate anti-cav valve. As you indicate, the main relief valve must be ok since the other functions are alive and well. I just tried opening the down port on the tilt ram and there is no significant flow with the pumps running and my toe through the floor board... so... must be one of the relief valves?? Is there anyway that the tilt lock valve can be affecting this?? Thanks again to all for the help, Robin.</p></blockquote><p></p>