Buy a new harness and gauges and get rid of BOSS. Best money you can spend.Ebay has one right now
Can you supply a little more info on this. Is this an aftermarket wiring harness you're talking about or a harness for the earlier models before BOSS? Concerning the gauges and required panel for them, is this also from a pre-boss model? Thanks.Buy a new harness and gauges and get rid of BOSS. Best money you can spend.
I went onto ebay yesterday after your post and found a manual for 512816001 and above that cost $15 and they'd send a link to download. I think I was ripped off because no link has been sent as of this a.m. Any help in obtaining this manual would be appreciated. We've got a BICS problem that we can't seem to trace. Intermittent on/off lights on the controller indicating a short somewhere. A schematic would help.Ebay has one right now
The manual I saw the bid was starting at ten dollars and but it now was fifty bucks for a real book......open a case with ebay they will refund your moneyI went onto ebay yesterday after your post and found a manual for 512816001 and above that cost $15 and they'd send a link to download. I think I was ripped off because no link has been sent as of this a.m. Any help in obtaining this manual would be appreciated. We've got a BICS problem that we can't seem to trace. Intermittent on/off lights on the controller indicating a short somewhere. A schematic would help.
You could email old machinist in this forum hes is the keeper of infoThe manual I saw the bid was starting at ten dollars and but it now was fifty bucks for a real book......open a case with ebay they will refund your money
Are you sure they are not sending you a cd for the 15 bucksYou could email old machinist in this forum hes is the keeper of info
Have you looked at the safetys in the seat and seat beltAre you sure they are not sending you a cd for the 15 bucks
The ad claimed that a web address would be supplied.Are you sure they are not sending you a cd for the 15 bucks
Yes that sounds like a scam........email OM would be fastest if he has itThe ad claimed that a web address would be supplied.
BOSS was an option, so there were always standard machines without it. BOSS is bad when it works, but when it doesn't, it can be real bear. Diagnosis can be very hard because many times, the problem makes no sense when testing. Wouldn't surprise me depending on what your problem is, you very well may need a new harness anyways.Yes that sounds like a scam........email OM would be fastest if he has it
Thanks for tip. Emailed him and he responded immediately with schematic. ThanksYou could email old machinist in this forum hes is the keeper of info
Three cheers for OM he has helped me many times a wealth of infoThanks for tip. Emailed him and he responded immediately with schematic. Thanks