Reply to thread

Message: <blockquote data-quote="K9" data-source="post: 119568" data-attributes="member: 7773">I too have a 763 that i bought last year.   No tilt no lift so sold as was.  I went over and through a bunch of stuff and determined it had to be the computer or the AHC module.  I sent the computer off the Radwell to have it evaluated and repaired rather than pay Bobcat $1500.  Bad bad decision.  Radwell said they would eval in 3-5 days and tell me if they could fix it.  A month later, it was determined they could fix it so i authorized repair.  It took about 2-3 months before i had it back.  I got so frustrated with them I ended up paying for the Bobcat computer.  It did need to be programmed by a mobile tech and said it had to be done on the machine.  I had to wait for 5 weeks for him to come, only to find he could not complete all the programming because something was not feeding the AHC module and said i needed to replace that.  And so I did.  Still did not lift/tilt.  I did finally locate the one wire leg that ties into 2 and had heavy verdigris to where it could not pass power.  Cleaned the connection and fixed the machine.Rambled... but from your symptoms I suspect you need to have your new computer programmed on the tractor to get everything in sync.  Another monopoly to keep Bobcat busy and paid i suppose.</blockquote>