Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 61535" data-attributes="member: 782"><p>you mentioned a nut on the bleeder on the injector pump , newer machines were automatic bleeders and there is no wheel to open the valve , older machines have a round knob on the valve , the knob gets broken off a lot and maybe thats what you got but don't see it -----you don't have to totally disconnect the injector tubes at the injector to bleed air , 1 full turn of the nut should be more than enough --------------getting back to your problem , is it only hard starting after it sets up over night or longer , or s it every time you kill it then try to restart</p></blockquote><p></p>