763G HYD. PROBLEMS

[rayburn98]

Went to use the machine and the idot light for hyd. pressure stayed on after machine started and beeped twice...machine worked fine for the 20 minutes that I used it and I am just wondering what to do next. I have 100 hrs since last serviced by my dealer and have only had the machine since Oct. so I can't really tell you any history about the machine. Any help is appreciated. Pete

 

[Tazza]

The senders go bad, hopefully its just that. If it doesn't fix it, you need to check your charge pressure.

 

[rayburn98]

The senders go bad, hopefully its just that. If it doesn't fix it, you need to check your charge pressure.

Just checked for codes and it come up 05-21 pressure out of range high...

 

[Tazza]

Just checked for codes and it come up 05-21 pressure out of range high...

Clear the code, turn the key and see if it gives the same error. It could still be bad, just stuck.
Not sure if it will spit the error out without it being started though....

 

[rayburn98]

Clear the code, turn the key and see if it gives the same error. It could still be bad, just stuck.
Not sure if it will spit the error out without it being started though....

I think it must be the switch...It beeps before the motor is ever started...I disconected the battery and re connected it...same code ...ordered the sender today...should know by the middle of the week. Thanks for your help. Pete