763 G wont start

[mdurbahn]

I have a 763G that turn over but doesn't fire. Before today it would start quickly, if it sat for a long time I would always squeeze primer first. All fluids and filters and battery have less then 10 hours on them only. Any ideas on what to look for?

 

[Tazza]

There are a few things it could be:
Pickup tube broken in tank.
Fuel shut off solenoid is not working.
Is there any smoke while cranking?
Open the bleed screw a little bit and pump the hand primer and see if it feels firm and not all squishy and full of bubbles. You can feel the air over when they are full of fuel.