Reply to thread

Message: <blockquote data-quote="crazycat" data-source="post: 35802" data-attributes="member: 2997"><p>OK, I put a new seal in and got everything back together and filled up with fluid. Everything works except the lift arms. It moves back and forth and the bucket tilt works. I checked for leaks and so far none found. What would cause the lift arms not to work? I am still going to post pics. Just a hint, I used a 4" PVC coupling piece with about a 12" section of 4" pipe, then a 4" into 2" reducer with a piece of 2" pipe lobbed off at the edge of the 2" side of the reducer which added strength for hammering. Kind of a backyard seal tool but it worked perfect. Just for info, the seal was about $13.</p></blockquote><p></p>