Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 35777" data-attributes="member: 82">That's the seal you need the slide hammer for. There is a bearing behind it, but its about 3/4" back. Don't drill too deep and try and not force too many pieces of swarf back into it. The oil behind will fluch it out and not into the bearing, do don't be too concerned.You can even use self tapping screws and pliers to lever the seal out too. A slide hammer is a batter option though. You may want to do both sides, then you know its right.</blockquote>