753G problem again

[fiddlearound]

My 753G had sat a few weeks since last use, yesterday it started just fine and everything worked. Lifted the arms and moved about 30 yards, all of a sudden I heard a noise and then the lights began to blink--seat arm, traction, and lift. Stopped and tried to pick up arms, they wouldn't move, tried to back up, and it wouldn't. Tried to punch the traction button, but it wouldn't click and the other three buttons continued to blink. I've got to get my manuals to start reading, but thought I would ask if anyone could direct me in the right area of study. Thanks for any ideas. Alton

 

[OldMachinist]

If all the lights are flashing its a high or low voltage problem to the BICS(above 16 vdc or below 9 vdc) . I'd start by checking the battery cables at both ends for a good clean connection. Then charge the battery and see what it does.

 

[fiddlearound]

If all the lights are flashing its a high or low voltage problem to the BICS(above 16 vdc or below 9 vdc) . I'd start by checking the battery cables at both ends for a good clean connection. Then charge the battery and see what it does.

Well, you were right again Old Machinist. I cleaned the cables and gave the battery a good charge and everything ran just right. Thanks for the help.