Reply to thread

Message: <blockquote data-quote="lwood" data-source="post: 55508" data-attributes="member: 7487"><p>Hello new here I have a 753G I bought it a few weeks ago and am having trouble with it. It will not start off the key. I can jump it over on the starter and it will run as long as you hold the fuel shut off open. We have checked wiring harness, grounds, fuses, key switch, and had the starter rebuilt. I have checked with bobcat mechanics to see what they thought it might be and everyone I talked too is leaning towards the controller/computer. They say there is no way to test a computer. The only thing I can think of to test the computer is to put it on another machine and see if it does the same thing on a different machine. The only problem with that is it is very difficult to find another machine with that controller. Does anyone know what other machines use a gateway 2 plug controller? Anyone have any suggestions? I also took the computer out of the machine and took it by the dealer and they said since the seam had a split that it was more than likely shorted out inside the case. The computer is 750 dollars so the price makes me think they might sell quite a few of them. I don't mind spending the money on a computer but I want to know that it is the computer before I spend the cash. Any help would be greatly appreciated!!!</p></blockquote><p></p>