Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 18611" data-attributes="member: 82">Swapping motors is quite simple actually, 4 bolts 3 hoses.I would suspect bad motor seals on that side or a problem with your relief valve in the pump. Each hydrostatic section has a relief for both forward and reverse. As you only have a problem in reverse i would suspect a relief. The bad part is the motor and pump needs to come out to gain access to two of the reliefs. I am not sure if the ones on the top are for forward or reverse. As Murphy's law dictates, it will no doubt be the ones on the under side...I have a 751c that I'm working on, motor removal isn't THAT hard and changing motor seals is easy too. You are looking at about 80 USD for a seal kit if you kit the motors out.</blockquote>