Reply to thread

Message: <blockquote data-quote="maccor" data-source="post: 57545" data-attributes="member: 6107"><p>Was going from memory last night, but here's what was done, by my brother , who is a much more experienced and talented wrencher that the hack that I am....."We checked the compression and found the following. All checks require 3 pulses. Fuel solenoid was denergized and spun over prior to compression test to be sure the cylinders were clean. Test was preformed dry with no oil added to cylinders. Cyl 1 350 psi Cyl 2 225 psi Cyl 3 350 psi Cyl 4 350 psi We spun the motor over with the glow plugs out and fuel solenoid open and the following was observed. Cyl 1 and 2 spray fuel out the glow plug hole. Cyl 3 and 4 had no spray out glow plug hole. Removed Cyl 4 injector line at top of injector and fuel would dribble out. Reconnected line and cranked again and no fuel spray out of glow plug hole." Based on this info, he pulled the injectors and cleaned them out. Not sure if this helps or not. UGH!! PUG!!</p></blockquote><p></p>